Hello, welcome to come! Email:[email protected]
The EasyEights™ EasySep™ Magnet is designed to hold up to 8 standard 5 mL 12 x 75 mm round-bottom tubes on one side and 8 standard 14 mL 17 x 95 mm round-bottom or 15 mL conical tubes on the other side. Species. Human Mouse Rat Non-Human Primate Other. Application. Cell Isolation.
12-Tube Magnetic Separation Rack. The 12-Tube Magnetic Separation Rack is designed to be used for small-scale separations using magnetic particles. Strong magnets Neodymium rare earth permanent magnets. Capacity 12 x 1.5 mL tubes. Convenience Use with magnetic particle-based affinity purification for rapid small-scale purifications. Catalog .
The MagAttract Magnetic Rack is a convenient separation device for nucleic acid purification using magnetic beads e.g. MagAttract Suspension G in 2 ml tubes. The beads are pulled to the side of the 2 ml tube by a magnetic field which has a strength of 50 megaoersted and are held in place while solutions are exchanged or removed.
A magnetic separation unit designed to hold and separate magnetic particles to the side of the tubes up to five 15 mL tubes and three 50 mL tubes. The unit contains five bar magnets embedded in the plastic. PN 472250. Format Magnetic Separators
The biomolecules or cells are eluted and concentrated from the magnetic beads using appropriate buffers for downstream applications. BioVisions Magnetic Rack uses permanent magnets and has a compact design to accommodate different sizes of tubes including twelve 1.5 ml tubes two 15 ml tubes and two 50 ml tubes.
A magnetic separation unit designed to hold and separate magnetic particles to the side of the tubes up to five 15 mL tubes and three 50 mL tubes. The unit contains five
DescriptionA magnetic separation unit designed to hold and separate magnetic particles to the side of the tubes up to six 50 mL tubes The unit contains bar magnets embedded in a plastic housing Storage and StabilityShippingRoom temperatureStorageRoom Temperature. . 6 x 50 mL Tube Magnetic Separator
Magnetic Beads Separator for 1.5 ml Tubes. Tube rack with magnets for magnetic beads separation. For 1.5 ml microcentrifuge tubes. Fit four tubes. Easy to view where the beads are concentrated so it is easier to removesupernatant without disturbing beads.
The 50 ml Magnetic Separation Rack is designed to be used for small-scale separations using magnetic particles. Capacity four 50 ml tubes. Magnets Neodymium rare earth permanent magnets.
The 50 ml Magnetic Separation Rack is designed to be used for small-scale separations using magnetic particles. Capacity four 50 ml conical tubes. Magnets Neodymium rare earth permanent magnets. 50 ml Magnetic Separation Rack Product Categories Anitibodies Products Resins Magnetic Beads amp; Racks Products Applications ChIP Antibodies Pull .
The EpiMag HT 96-Well Magnetic Separator is a magnetic stand magnetic rack that allows paramagnetic bead precipitation of liquid samples from various flat-bottom or U-bottom 96-well microplates we recommend our EpiMag 96-Well Microplates for ideal compatibility. Designed from repurposed Greiner microplates it ensures a high degree of compatibility with microplates while
General description. Rack accommodates six 1.5 mL microcentrifuge tubes and provides a vertical separation in less than 5 minutes. Plastic frames with embedded permanent magnets for affinity filtration with magnetic matrices. These separators attract magnetic particles
If your routine lab work involves separating magnetic particles we can support you with magnetic separation devices in a range of formats for effective separation. With tube magnets in a range of sizes for single or multiple tubes and high-throughput magnets for 96-well plates we have a solution to suit your requirements.
Separation Racks For Multiple Tube Types Magnetic separation stands for 0.2 mL PCR strips 1.5 mL Microcentrifuge tubes and 15 mL 50 mL Centrifuge Magnet Plates Permagen USA Magnet Plates For Any Application Permagen offers an extensive line of magnet plates for 96-Well 384-Well and 24-Well Microplates all with standard SBS footprint to
The MiniCollect tube includes an integrated scoop allowing droplets of blood to be collected easily and hygienically. The additional use of a capillary or funnel is not necessary anymore. Maximum tube opening for minimum adhesion. wide opening of the tube ensures an efficient blood flow; increased diameter facilitates the mixing of the sample
The DynaMag™-2 magnet combines a strong magnetic attraction for efficient separations in standard microcentrifuge tubes with a flexible and smart ergonomic design. • Optimal working volume 10–2000 L. • Holds up to 16 standard 1.5–2 mL microcentrifuge tubes in numbered spaces. • Good control and visibility of your sample.
The Magnetic Separation Rack is designed to be used for small-scale separations using magnetic particles. Capacity 6 x 1.5 ml tubes. 6-Tube Magnetic Separation Rack Product Source Magnets Neodymium rare earth permanent magnets. Product Categories Resins Magnetic Beads amp; Racks Products. Properties amp; Usage
The Easy 50 EasySep™ Magnet generates a high-gradient magnetic field in the interior cavity that is strong enough to separate cells labeled with magnetic EasySep™ particles without the use of columns. The Easy 50 EasySep™ Magnet is designed to hold a standard 50 mL conical tube.
The MACSxpress Separator contains a powerful magnet that induces a strong magnetic field within sample tubes. Cells that are magnetically labeled with MACSxpress beads will adhere to the tube wall while the supernatant contains the non-labeled target fraction. It can be used with 5 15 or 50 mL tubes.
Singapore Miltenyi Biotec Asia Pacific Pte Ltd. 100 Beach Road 28-06 to 28-08 Shaw Tower Singapore 189702 . When placed on a magnetic separator the . 50 mL tubes 50 mL 4 mL 8 mL Volumes refer to whole blood samples only.
1. Separate the magnetic beads by placing the sample tube on the magnetic separator. Wait 1–2 minutes until all the beads have been attracted to the magnets. Remove and dispose of supernatant with a pipette taking care not to disturb the magnetic beads. 2. Remove the tube from the magnetic separator.